New Members
-
- Posts: 16
- Joined: Tue Sep 07, 2010 8:09 pm
- Location: North Carolina
- Contact:
New guy
Just getting the hang of Serial # 18, M-4 1963. So far so good but I am reading a lot about the tailwheel first landing, I thought it was just me. I am out of the Southern Pines area of North Carolina if anyone else is in the area. based at KSOP
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
I'm based at 9A9 in Marion NC about 150 miles west of you. I own a 1986 MX-7-180 which was recently rebuilt by Maule Flight.
Most Maule owners land tailwheel-first sometimes. There are lots of opinions on it. My preference is to land 3-point whenever possible but you need to be proficient in wheel landings in case of strong crosswinds.
Most Maule owners land tailwheel-first sometimes. There are lots of opinions on it. My preference is to land 3-point whenever possible but you need to be proficient in wheel landings in case of strong crosswinds.
Andy
1986 MX7-180
1986 MX7-180
-
- Posts: 16
- Joined: Tue Sep 07, 2010 8:09 pm
- Location: North Carolina
- Contact:
Maule flying
I am planning to fly to Triple Tree Sat and stay overnight SC00. I am working on prefecting my wheel landings.
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
- Jayson v Schalkwyk
- 100+ Posts
- Posts: 123
- Joined: Mon Sep 14, 2015 1:05 pm
- Location: Himeville, South Africa
- Contact:
Reviving an old topic....
I am buying a 1983 M6-235 with just over 4000hrs on the clock. Am a new tailwheel disciple and have had some dual in a J3, PA18, Tiger Moth and a Bushbaby (think South African Kit-fox) but never been signed out on any of them.
Chris Erasmus kindly let me fly his Bigfoot (m7-250) with an instructor and has got me even more itching to finish my tailwheel endorsement and get flying in my own Maule.
I fly a Global Express based in Nigeria for a living and live in a small town in eastern South Africa called Himeville.
Been reading so much on the forum trying to absorb it all. Thanks guys!
I am buying a 1983 M6-235 with just over 4000hrs on the clock. Am a new tailwheel disciple and have had some dual in a J3, PA18, Tiger Moth and a Bushbaby (think South African Kit-fox) but never been signed out on any of them.
Chris Erasmus kindly let me fly his Bigfoot (m7-250) with an instructor and has got me even more itching to finish my tailwheel endorsement and get flying in my own Maule.
I fly a Global Express based in Nigeria for a living and live in a small town in eastern South Africa called Himeville.
Been reading so much on the forum trying to absorb it all. Thanks guys!
-
- 100+ Posts
- Posts: 128
- Joined: Sat Nov 23, 2013 8:54 am
- Location: Smithfield, VA
- Contact:
Jason, welcome to the proper gear club! You will love your new lady, just make sure you keep you drift to ZERO and keep up with your rudders until you are stopped! She will feel squirrely for a while, after 100+ landings it will all be natural!
After you land and do your post flight, just stand up in front of her, inflate your chest, put your hands on your hips, and relish the moment, and think how unfortunate all those nose wheel drivers are that have never stepped up to the plate!
Congrats!
After you land and do your post flight, just stand up in front of her, inflate your chest, put your hands on your hips, and relish the moment, and think how unfortunate all those nose wheel drivers are that have never stepped up to the plate!
Congrats!
Loogie
-
- 100+ Posts
- Posts: 488
- Joined: Wed Oct 23, 2013 7:53 am
- Location: CO
- Contact:
- Jayson v Schalkwyk
- 100+ Posts
- Posts: 123
- Joined: Mon Sep 14, 2015 1:05 pm
- Location: Himeville, South Africa
- Contact:
Rez,
Yup, unless something monumental changes, it should be finalised this week. The annual has just been completed at Rand and am sure we will hear from the owner in the next day or so.
I have been fighting the urge to start ordering VG's and Gap seals until I know 100% that its done.
Cant bloody wait. Now I just have to wait till I get home just before Christmas.
This will be one of those "from me, to me" Christmas gifts...
Yup, unless something monumental changes, it should be finalised this week. The annual has just been completed at Rand and am sure we will hear from the owner in the next day or so.
I have been fighting the urge to start ordering VG's and Gap seals until I know 100% that its done.
Cant bloody wait. Now I just have to wait till I get home just before Christmas.
This will be one of those "from me, to me" Christmas gifts...
- KYLE
- Posts: 13
- Joined: Mon Feb 01, 2016 5:21 pm
- Location: PIQUA, OHIO
- Contact:
Did everything work out ok, Jayson? Hope you are enjoying your new ride!
I am in the process of closing on an M4 and very excited to get her home and start a new aspect of flying.
1700 flight time with 110 of that on a SkyBolt without any issues, but it's been a few years ago, so transitioning back to TW from high performance stuff may be interesting.
Hardest thing right now is the waiting for paperwork... UGH
I am in the process of closing on an M4 and very excited to get her home and start a new aspect of flying.
1700 flight time with 110 of that on a SkyBolt without any issues, but it's been a few years ago, so transitioning back to TW from high performance stuff may be interesting.
Hardest thing right now is the waiting for paperwork... UGH
- Jayson v Schalkwyk
- 100+ Posts
- Posts: 123
- Joined: Mon Sep 14, 2015 1:05 pm
- Location: Himeville, South Africa
- Contact:
Hi Kyle,
Yes, all went well and was finalised in early January. I have completed my conversion and tailwheel endorsement and am really enjoying the Maule. I am now needing to learn the finer details, like learning to fly a LOT slower than I am used to into runways a LOT shorter than I am used to.
All in good time...
Good luck with your deal. Keeping fingers crossed for you
Yes, all went well and was finalised in early January. I have completed my conversion and tailwheel endorsement and am really enjoying the Maule. I am now needing to learn the finer details, like learning to fly a LOT slower than I am used to into runways a LOT shorter than I am used to.
All in good time...
Good luck with your deal. Keeping fingers crossed for you
1983 M6-235C
-
- Posts: 4
- Joined: Mon Jan 18, 2016 7:58 pm
- Location: Nipawin, Sk, Canada
- Contact:
Hi All,
Just joined the forum because I just bought a Maule! I'm still in the process of getting my PPL but came up on a good deal for a reasonably low houred 1968 M4-210C Jetason. Fortunately the fellow I bought it from is a good family friend with a lot of hours in the seat of this thing; he will be spending lots more hours in it with me before I'm out on my own in it! He is also going to hangar it for me until mine is built. He has a newer 185 that he bought as a partnership that the other guy wants out of now, which is why he is selling the M4.
I'm located Smack in the middle of Canada in NE Saskatchewan. I farm so besides for shear enjoyment, I am getting my license to check fields/crops, as well as do some ice fishing up north on skis. Nice to see s great community to support these great planes.
Just joined the forum because I just bought a Maule! I'm still in the process of getting my PPL but came up on a good deal for a reasonably low houred 1968 M4-210C Jetason. Fortunately the fellow I bought it from is a good family friend with a lot of hours in the seat of this thing; he will be spending lots more hours in it with me before I'm out on my own in it! He is also going to hangar it for me until mine is built. He has a newer 185 that he bought as a partnership that the other guy wants out of now, which is why he is selling the M4.
I'm located Smack in the middle of Canada in NE Saskatchewan. I farm so besides for shear enjoyment, I am getting my license to check fields/crops, as well as do some ice fishing up north on skis. Nice to see s great community to support these great planes.
1968 M4-210C
-
- Posts: 4
- Joined: Mon Jan 18, 2016 7:58 pm
- Location: Nipawin, Sk, Canada
- Contact:
Hi All,
Just joined the forum because I just bought a Maule! I'm still in the process of getting my PPL but came up on a good deal for a reasonably low houred 1968 M4-210C Jetason. Fortunately the fellow I bought it from is a good family friend with a lot of hours in the seat of this thing; he will be spending lots more hours in it with me before I'm out on my own in it! He is also going to hangar it for me until mine is built. He has a newer 185 that he bought as a partnership that the other guy wants out of now, which is why he is selling the M4.
I'm located Smack in the middle of Canada in NE Saskatchewan. I farm so besides for shear enjoyment, I am getting my license to check fields/crops, as well as do some ice fishing up north on skis. Nice to see s great community to support these great planes.
Just joined the forum because I just bought a Maule! I'm still in the process of getting my PPL but came up on a good deal for a reasonably low houred 1968 M4-210C Jetason. Fortunately the fellow I bought it from is a good family friend with a lot of hours in the seat of this thing; he will be spending lots more hours in it with me before I'm out on my own in it! He is also going to hangar it for me until mine is built. He has a newer 185 that he bought as a partnership that the other guy wants out of now, which is why he is selling the M4.
I'm located Smack in the middle of Canada in NE Saskatchewan. I farm so besides for shear enjoyment, I am getting my license to check fields/crops, as well as do some ice fishing up north on skis. Nice to see s great community to support these great planes.
1968 M4-210C
- Brenton C
- 100+ Posts
- Posts: 286
- Joined: Tue Aug 06, 2013 5:03 am
- Location: Calgary, AB
- Contact:
-
- Posts: 4
- Joined: Mon Jan 18, 2016 7:58 pm
- Location: Nipawin, Sk, Canada
- Contact:
- Brenton C
- 100+ Posts
- Posts: 286
- Joined: Tue Aug 06, 2013 5:03 am
- Location: Calgary, AB
- Contact:
There's a thread somewhere here about discussing relative costs of Maule vs Cessna. I seem to recall a $5k cessna flap compared against a more or less comparable Maule flap for $900.
If only engine repair/replacement/overhaul costs were similarly disparate!
Not to take anything away from Cessnas, but you get a whole lot of plane for your money with a Maule -- and a plane that many think is more fun to fly.
If only engine repair/replacement/overhaul costs were similarly disparate!
Not to take anything away from Cessnas, but you get a whole lot of plane for your money with a Maule -- and a plane that many think is more fun to fly.
Who is online
Users browsing this forum: No registered users and 22 guests