dear friend,I dismounted my Maule M 5 210 C and we found the structure of the fuselage a little bit lower in the left side and the vertical fin bending on the left. Where could I find the scheme and the right distance between some
known point to check ? Thanks for the attention Stefano
structure of my Maule M 5
-
- Posts: 3
- Joined: Tue Jun 21, 2011 3:21 am
- Location: Italy
- Contact:
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
I would think the factory could get you a set of drawings that would have the info you need. Or maybe Maule Flight is a better option: [/url]http://www.mauleflight.com/[url]
Andy[/url]
Andy[/url]
- TomD
- 100+ Posts
- Posts: 1361
- Joined: Sat Aug 26, 2006 7:13 pm
- Location: Seattle area ( S43 )
- Contact:
M5
There is a rigging instructions document available from Maule Aerospace.
That should give you a starting point.
If the bird is listing to port, my first guess is an oleo problem.
Hopefully nothing is bent.
That should give you a starting point.
If the bird is listing to port, my first guess is an oleo problem.
Hopefully nothing is bent.
Who is online
Users browsing this forum: No registered users and 20 guests