Uncommanded Parking Brake Activation
- andy
- Site Admin
- Posts: 1667
- Joined: Mon Aug 06, 2007 2:05 pm
- Location: Lake James, NC, USA
- Contact:
-
- 100+ Posts
- Posts: 212
- Joined: Sun Sep 06, 2015 7:32 pm
- Location: Brawley, Ca. USA
- Contact:
-
- 100+ Posts
- Posts: 116
- Joined: Fri Sep 10, 2010 7:19 pm
- Location: New York '75 M5-210C, Rebuilding (2) M7-235C for retirement sanity.
- Contact:
Uncommanded Parking Brake Activation
Pls. Share the estimated time and materials. This is one feature I would like to add.
Thanks
Tom
Thanks
Tom
- gbarrier
- 100+ Posts
- Posts: 1562
- Joined: Thu Jul 14, 2011 5:41 pm
- Location: 9NR4 North Carolina
- Contact:
If Maule can supply the hoses, bracket and valve, etc. as a kit that would probably be best way to buy it all. Has anyone priced this from Maule?
Still have to weld the bracket and tab to the tubes. My compass hates me every time i weld on the frame. Could probably use a couple of adel clamps but then you are not in compliance with the drawing. Looks like something best done at annual when floorboards are already out at best.
Still have to weld the bracket and tab to the tubes. My compass hates me every time i weld on the frame. Could probably use a couple of adel clamps but then you are not in compliance with the drawing. Looks like something best done at annual when floorboards are already out at best.
- crbnunit
- 100+ Posts
- Posts: 1890
- Joined: Tue Mar 18, 2008 12:42 pm
- Location: Alaska
- Contact:
-
- 100+ Posts
- Posts: 140
- Joined: Thu Dec 10, 2015 5:54 am
- Location: S21
- Contact:
I've got my plane down to the frame and looked into adding the hydraulic parking brake. I spoke with someone at Maule (I forget who it was, but maybe Brian or Duane?), and they said they had either never seen one, or only a VERY limited number.
I couldn't find the specified valve either, which is what prompted the call, so I'm not installing one.
I couldn't find the specified valve either, which is what prompted the call, so I'm not installing one.
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
- ajak
- 100+ Posts
- Posts: 142
- Joined: Sat May 09, 2015 12:20 pm
- Location: Wolf Lake, AK
- Contact:
Re: Uncommanded Parking Brake Activation
Guess this is an old post, but wondering if anyone has any newer experience on how involved it is converting the old tabbed parking brakes to the hydraulic ones (Drawing # 9117E)? I am currently highly motivated after an incident the other day where one of the tabs wouldn't release after landing and parking on a steep sloped backcountry strip. Apparently it wasn't a particularly confidence inspiring experience for my wife who was watching me lying upside down working on disconnecting the tab far off the grid with clouds starting to roll in.
AJ
1983 M-6-235
IO-540W1A5D, 81" Hartzell, 4" ext gear, 31" tires, Atlee exhaust, long wings, VGs, LED ldg/nav/strobes, EDM-900, CiES
1983 M-6-235
IO-540W1A5D, 81" Hartzell, 4" ext gear, 31" tires, Atlee exhaust, long wings, VGs, LED ldg/nav/strobes, EDM-900, CiES
- Andy Young
- 100+ Posts
- Posts: 1548
- Joined: Wed Oct 05, 2011 7:10 am
- Location: Alaska, Antarctica, Colorado, and Others
- Contact:
Re: Uncommanded Parking Brake Activation
Asa to the white courtesy phone…
-
- 100+ Posts
- Posts: 298
- Joined: Sat Dec 22, 2018 1:09 pm
- Location: KY+AK
- Contact:
Re: Uncommanded Parking Brake Activation
I did it during my m6 rebuild and it works perfectly. Here’s the process overall.ajak wrote: ↑Mon Sep 04, 2023 2:32 pmGuess this is an old post, but wondering if anyone has any newer experience on how involved it is converting the old tabbed parking brakes to the hydraulic ones (Drawing # 9117E)? I am currently highly motivated after an incident the other day where one of the tabs wouldn't release after landing and parking on a steep sloped backcountry strip. Apparently it wasn't a particularly confidence inspiring experience for my wife who was watching me lying upside down working on disconnecting the tab far off the grid with clouds starting to roll in.
- Source the hydraulic valve
- Remove current parking brake tabs, cable/spring, etc
- Weld up valve bracket per drawing
- Weld bracket onto airframe per drawing
- Build new brake lines to go from the cylinders to valve to landing gear. Requires new routing and may interfere with heater scat depending on your config.
- install/rig new push/pull control to operate the valve.
It would be a huge hassle to do the welding and hose routing and such with the airplane assembled but could be done I imagine. I did mine on a bare airframe. Personally I’d just delete your current parking brake and not bother with the hydraulic unless you’re pulling the plane apart for a recover or something.
-
- Posts: 47
- Joined: Fri May 05, 2017 1:52 pm
- Location: NC
- Contact:
Re: Uncommanded Parking Brake Activation
I'm adding one also, had a hard time finding the valve. Ended up finding one through a several year old post on the Citabria forum. I bought one this spring, imagine he still has one more.
Here's a link to the forum topic- https://champcitabriadecathlonforums.co ... s-fs.1119/
Here's a link to the forum topic- https://champcitabriadecathlonforums.co ... s-fs.1119/
Who is online
Users browsing this forum: montana maule and 20 guests