Yep, I'm in Squamish. Look forward to maulin' around with you.
Looking for M4-210C information.
-
- Posts: 24
- Joined: Sat Sep 05, 2020 6:59 pm
- Location: Squamish, BC
- Contact:
Re: Looking for M4-210C information.
Warwick Patterson
Flying BC Podcast & Videos
Pilot stories and aviation adventures from British Columbia, Canada.
Flying BC Podcast & Videos
Pilot stories and aviation adventures from British Columbia, Canada.
- HeavyLoad
- 100+ Posts
- Posts: 124
- Joined: Wed Jun 21, 2017 9:46 pm
- Location: Battle Ground, WA
- Contact:
Re: Looking for M4-210C information.
I don't have a picture right now, but it's basically some 3M clear tape that goes in between the gap. Not sure of the part #, but you can get it from the Maule factory. And only takes 20mins(?) to install.
===========
M5-210C
RV6
M5-210C
RV6
-
- Posts: 24
- Joined: Sat Sep 05, 2020 6:59 pm
- Location: Squamish, BC
- Contact:
Re: Looking for M4-210C information.
@G21pilot I hope your purchase is going well or has happened. I just picked up my M4 yesterday! Parking it at Pitt Meadows this winter as we don't have any hangars available in Squamish and I don't want to leave it outside.
Warwick Patterson
Flying BC Podcast & Videos
Pilot stories and aviation adventures from British Columbia, Canada.
Flying BC Podcast & Videos
Pilot stories and aviation adventures from British Columbia, Canada.
- HeavyLoad
- 100+ Posts
- Posts: 124
- Joined: Wed Jun 21, 2017 9:46 pm
- Location: Battle Ground, WA
- Contact:
Re: Looking for M4-210C information.
I noticed a tube behind the rear baggage area. I'm guessing thats to hold long things like fishing poles?
===========
M5-210C
RV6
M5-210C
RV6
-
- Posts: 24
- Joined: Fri Sep 04, 2020 7:34 am
- Contact:
Re: Looking for M4-210C information.
Yes it is!
The purchase took a while as the airplane hadn’t flown in three years. We had a lot of work to do to make it airworthy again. The good news is we are flying her now and , though she’s not pretty, she’s a gas to fly. I’m. loving getting to know her both as a pilot and a wrench turner.
Thanks again for all the information on the forum!
Updated photos in the album link: https://www.icloud.com/sharedalbum/#B0b5nhQSTPUhcO
Who is online
Users browsing this forum: No registered users and 15 guests